Removal And Installation: Removal
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Make sure the ignition switch is in position 0.
Remove the cover.
- Disconnect the electrical connector.
-
CAUTION:
- Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and clean the area with water.
- Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.
Disconnect the 6 brake tubes.
- Position an absorbent cloth to collect fluid spillage.
Remove the ABS module from the mounting bracket.
- Loosen, but do not remove, the 2 nuts securing the ABS module to the bracket.