DTC C1119-09: Hydraulic Pressure - Component Failures: Action

Check and top up the hydraulic fluid as required
Check integrity of hydraulic system and rectify any leaks as required. Clear the DTCs and retest
If the fault persists, install a new dynamic response valve block as required and clear adaptive data. Clear the DTCs and retest
If the fault persists, check the operation of the front and rear actuators and install new actuator(s) as required. Clear the DTCs and retest
If the fault persists, check the dynamic response hydraulic pump pressure/fluid flow. If faulty, install a new dynamic response hydraulic pump as required