DTC C1040-26: Front Axle Rod Pressure Sensor - Signal rate of change below threshold: Action
- Check dynamic response system hydraulic fluid levels. Rectify as required
- Check dynamic response system secondary circuit for leaks. Repair as required
- Refer to the appropriate system wiring diagram and check the dynamic response front actuator rod-side pressure sensor circuit for short circuit to another circuit. Repair circuit as required, clear the DTCs and retest
- Reset pressure sensor offset settings and clear adaptive data. Clear the DTCs and retest
- If the fault persists, install a new dynamic response valve block as required and reset adaptive data. Clear the DTCs and retest