Auxiliary Blower Motor Control Module: Removal
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery ground cable. Refer to Specifications article.
- Remove the LH C-pillar lower trim panel Refer to C-Pillar Lower Trim Panel article.
- Remove the blower motor resistor.
- Disconnect the electrical connector.
- Remove the 2 screws.
NOTE:
Note the fitted position.