FixVault
Home › Land Rover › 2016 › LR4 Base › Repair and Diagnosis › Transmission › Transfer Case › Four-Wheel Drive Systems -- LR4/L319 › Four-Wheel Drive Systems › Four-Wheel Drive Systems Four-Wheel Drive Control Module › Removal And Installation › Installation

Removal And Installation: Installation

  1. To install, reverse the 1, removal procedure.
    1. Connect the Land Rover approved diagnostic equipment.
    2. Clear any Diagnostic Trouble 2. Codes (DTCs).
    3. Start the service function "transfer case-transfer case replacement"
    4. Carry out the transfer case calibration procedure.
    5. Clear any DTCs after calibration and check for correct function.
About FixVault