DTC B00A0-87: Occupant Classification System - Missing message: Action
NOTE:
Do not attempt to install individual components from the service kit as they are calibrated to function as a single assembly
- Switch the ignition on and retest for active Diagnostic Trouble Code(s)
- Disconnect and reconnect the occupant classification sensor connector, clear the Diagnostic Trouble Code(s) and retest
- Refer to the electrical circuit diagrams and check the occupant classification system circuit for short circuit to ground, short circuit to power, open circuit, high resistance and resolve where necessary. Clear Diagnostic Trouble Code(s) and retest
- If fault persists, install a new occupant classification sensor service kit as required (complete service kit consists of foam, occupant classification sensor bladder mat with attached smart digital pressure sensor)