FixVault
Home › Lexus › 1991 › LS 400 › Repair and Diagnosis › External Pages › Different car › Section 1 (Defogger - Rear Window) › Component Testing › Defogger Relay Test › SC300 & SC400

SC300 & SC400

WARNING: This page is about a different car, the 1992 Lexus SC 400, 1992 Lexus SC 300, 1992 Lexus LS 400, and 1992 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove relay from relay block No. 2 on driver's side of engine compartment. Using an ohmmeter, check for continuity between relay terminals No. 1 and 3. See Fig 1. If continuity does not exist, replace relay. If continuity does exist, go to next step.
    Fig 1: Identifying Rear Defogger Relay Terminals (SC300 & SC400)
    G93D01671Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Check for continuity between terminals No. 2 and 4. If continuity exists, replace relay. If continuity does not exist, go to next step.
  3. Connect battery voltage to relay terminal No. 1 and ground terminal No. 3. Continuity should now exist between relay terminals No. 2 and 4. If continuity does not exist, replace relay.
About FixVault