Power Window Signal, With Ignition Off

Locate power door lock control relay. Ensure control relay 16-pin Gray connector is connected. Using voltmeter positive lead, backprobe connector terminal No. 15 (Green/Orange wire). Using voltmeter negative lead, backprobe connector terminal No. 16 (White/Black wire). Turn ignition switch to LOCK or ACC position, and close all doors. Ensure battery voltage is present. Open driver's or passenger's door and ensure battery voltage is not present. With driver's door open, turn ignition switch to ON position and ensure battery voltage is present. If operation is not as specified, replace power door lock control relay and retest system.