Indicator Light Circuit

Verify indicator light operation. See INDICATOR LIGHT TEST . Turn ignition switch to OFF position. Disconnect ECU connector. See Fig 1. Check for continuity between ground and ECU connector T8 terminal No. 12 (Blue/White wire). If continuity is not present, repair open in indicator light circuit harness or connectors. If continuity is present, check ECU. See PIN VOLTAGE TESTS . If found to be defective, replace ECU and retest system.

THEFT DETERRENT ECU CONNECTOR "A" IDENTIFICATION

Terminal No.	Symbol	Terminal ID
1	TO	Luggage Compartment Door Opener Motor
2	ACT-	Door Lock Motor
3	ACT+	Door Lock Motor
4	E	Ground
5	-	Not Used
6	PRLY	Power Main Relay
7	IG	Ignition Switch ON
8	ACC	Ignition Switch OFF
9	+B2	Power Source

Fig 1: Identifying Theft Deterrent Electronic Control Unit (ECU) Connector Terminals

THEFT DETERRENT ECU CONNECTOR "B" IDENTIFICATION

Terminal No.	Symbol	Terminal ID
1	+B1	Power Source
2	LSWR	Door Unlock Detection Switch
3	CTY	Door Open Detection Switch
4	DSWL	Luggage Compartment Door Courtesy Switch
5	L2	Door Key Lock & Unlock Switch
6	UL3	Door Key Lock & Unlock Switch
7	DSWD	Door Open Detection Switch
8	UL2	Door Key Lock & Unlock Switch
9	LUG	Luggage Compartment Door Key Operated Switch
10	HEAD	Headlight
11	SH	Theft Deterrent Horn
12	IND	Security Indicator Light
13	TSW	Luggage Compartment Door Opener Switch
14	DSWH	Engine Hood Courtesy Switch
15	LSWD	Door Unlock Detection Switch
16	UL1	Door Lock Control Switch (Unlock)
17	-	Not Used
18	-	Not Used
19	DSWP	Door Open Detection Switch
20	KSW	Key Unlock Warning Switch
21	LSWP	Door Unlock Detection Switch
22	L1	Door Lock Control Switch (Lock)
23	TAIL	Taillight
24	HORN	Horn
25	SRLY	Ignition Switch ST Position