Continuity Test
Disconnect combination switch connectors. Check for continuity between specified switch terminals. See WIPER/WASHER SWITCH CONTINUITY table. See Figure. If continuity is not as specified, replace combination switch.
WIPER/WASHER SWITCH CONTINUITY
| Switch Position | Check Continuity Between Terminals No. | |||
|---|---|---|---|---|
| Off | 7 & 16 | |||
| Intermittent | 7 & 16 | |||
| Low | 7 & 17 | |||
| High | 8 & 17 | |||
| Washer | ||||
| Off | (1) | |||
| On | 2 & 11 | |||
|
||||