Shift Lock Control Switch
Disconnect electrical connector from shift lock control switch. Using ohmmeter, check continuity between specified terminals in relation to shift lever. See WIRING DIAGRAMS . See SHIFT LOCK CONTROL SWITCH CONTINUITY table. Replace switch if continuity is not as specified.
NOTE:
Continuity must be checked in accordance with position of release button on shift lever and shift lever position.
SHIFT LOCK CONTROL SWITCH CONTINUITY
| Shift Lever Position & Condition | Terminals |
|---|---|
| Any Other Gear Except Park | P & P2 |
| Park & Release Button Not Pushed | P & P1 |
| Park & Release Button Is Pushed | P & P1 Or P & P2 |