Continuity Test
Disconnect 18-pin combination (wiper/washer) switch connector. Check for continuity between specified wiper/washer switch terminals with switch in specified position. See WIPER/WASHER SWITCH CONTINUITY table. See Fig 1. If continuity is not as specified, replace combination (wiper/washer) switch.
WIPER/WASHER SWITCH CONTINUITY
| Wiper Switch Position | Check Continuity Between Terminals No. | |||
|---|---|---|---|---|
| OFF | 7 & 16 | |||
| INT | 7 & 16 | |||
| LO | 7 & 17 | |||
| HI | 8 & 17 | |||
| Washer | ||||
| OFF | (1) | |||
| ON | 2 & 11 | |||
|
||||