FixVault

Trouble Shooting

Perform a visual inspection, checking for open fuses, disconnected or damaged wire harnesses and components. Repair or replace as necessary, and retest system operation. If no problems are found, diagnose by symptom. See SYMPTOM INDEX  table.

SYMPTOM INDEX

Problem Inspect
Wipers & Washers Do Not Operate WIPER Fuse
(1) Wiper/Washer Switch
(1) Wiper Motor
(2) Wiring Harness
Wipers Do Not Operate In LO Or HI (1) Wiper/Washer Switch
(1) Wiper Motor
(2) Wiring Harness
Wipers Do Not Operate In INT (1) Wiper/Washer Switch
(1) Wiper Motor
(2) Wiring Harness
Washer Motor Does Not Operate (1) Wiper/Washer Switch
(1) Washer Motor
(2) Wiring Harness
Wipers Do Not Operate When Washer Switch Is On (1) Washer Motor
(2) Wiring Harness
Washer Fluid Does Not Operate Washer Hose & Nozzle
With Wiper Switch In HI Position, Wiper Blade Contacts Body (1)(3) Wiper Switch
(2)(3) Wiring Harness
With Wiper Switch In OFF Position, Wiper Blade Does Not Retract Or Position Is Incorrect (1)(3) Wiper Switch
(2)(3) Wiring Harness
(1) Perform appropriate circuit test under SYSTEM TESTS . If more than one circuit test is listed, perform tests in order listed.
(2) Check wiring harness for opens or shorts. See WIRING DIAGRAMS . Repair or replace as necessary, and retest system operation.
(3) Check wiper arm adjustment. See WIPER ARMS  under ADJUSTMENTS.