Steering Column: Installation
WARNING: This page is about a different car, the 2000 Lexus GS 400 and 2000 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
During installation, if spiral cable mating mark is not properly aligned, steering wheel may not turn completely, or flat cable inside spiral cable may be severed, disabling SRS.
To install, reverse removal procedure. Ensure front wheels are in straight-ahead position. Install combination switch. Turn spiral cable counterclockwise until it stops. Turn spiral cable clockwise about 3 turns until colored mating mark is aligned. Ensure steering wheel-to-steering shaft reference mark is aligned. Tighten bolts and nuts to specifications. See TORQUE SPECIFICATIONS .