FixVault
Home › Lexus › 2000 › LX 470 › Repair and Diagnosis › Suspension › Suspension Control Systems › Active Height Control & Adaptive Variable Suspension › Component Tests › Pressure Value Of Front Shock Absorber › Using Scan Tool

Using Scan Tool

  1. Connect LEXUS hand-held tester to (DLC3). See Figure.
  2. Start engine and push height select switch to adjust vehicle height to "N" position.
  3. Push height select switch to adjust vehicle height from "N" to "LO" then back to "N" position.
  4. Stop engine. Read pressure value of front shock absorber with hand-held tester. Pressure should read 925-1067 PSI (6378-7357 kPa).
  5. Start engine and push height select switch to adjust vehicle height to "N" position. Check fluid level.
About FixVault