Diagnosis & Repair
- Check SLIP warning light operation. If SLIP warning light does not properly, check instrument cluster wiring harness for open and short circuits. See WIRING DIAGRAMS in appropriate INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. Repair or replace as necessary. If SLIP warning light operation is okay, go to next step.
- Check for short or open in Light Green/Red wire between terminal No. 3 at ABS/TRAC ECU A19 connector and terminal No. 12 at instrument cluster 18-pin connector. Repair wiring as necessary. If wire is okay, replace ABS/TRAC ECU.