Stall Test Results
- If stall speed is the same for both ranges but lower than specification, engine output may be insufficient or stator one-way clutch may not be operating properly.NOTE: If stall RPM is more than 600 RPM less than specification, torque converter may be faulty.
- Stall speed exceeding specification in "D" range may be caused by a slipping forward clutch, defective No. 2 or overdrive one-way clutch or low main line pressure.
- Stall speeds exceeding specification in "R" range may be caused by a low main line pressure, direct clutch slipping, 1st and reverse brake slipping or overdrive one-way clutch defective.
- Stall speeds exceeding specification in both ranges may be caused by a low main line pressure, improper fluid level or overdrive one-way clutch defective.
STALL SPEED SPECIFICATIONS
| Application | Stall RPM |
|---|---|
| SC300 | 2550-2850 |