FixVault

Problem Symptoms Table

If a normal code is displayed during the DTC check but the problem still occurs, check the circuits for each problem symptom in the order given in the PROBLEM SYMPTOMS  table and proceed to the relevant troubleshooting table.

PROBLEM SYMPTOMS

Symptom Suspect Area Refer To
ABS does not operate Only when 1 to 4 are all normal but the problem still occurs, replace the ABS & TRAC ECU.
  1. Check the DTC reconfirming that the normal code is output
  2. IG power source circuit
  3. Speed sensor circuit
  4. Check the ABS & TRAC actuator with a checker. If abnormal, check the hydraulic circuit for leakage (See CHECK FOR FLUID LEAKAGE  )
PRE-CHECK 
DTC C1241/41: IG POWER SOURCE CIRCUIT 
DTC C0200/31-C0215/34: SPEED SENSOR CIRCUIT 
ON-VEHICLE INSPECTION in ABS & TRAC ACTUATOR - LEXUS article
ABS does not operate efficiently Only when 1 to 4 are all normal but the problem still occurs, replace the ABS & TRAC ECU.
  1. Check the DTC reconfirming that the normal code is output
  2. Speed sensor circuit
  3. Stop light switch circuit
  4. Check the ABS & TRAC actuator with a checker. If abnormal, check the hydraulic circuit for leakage (See CHECK FOR FLUID LEAKAGE  )
PRE-CHECK 
DTC C0200/31-C0215/34: SPEED SENSOR CIRCUIT 
DTC C1249/49: Stop Light Switch Circuit 
ON-VEHICLE INSPECTION in ABS & TRAC ACTUATOR - LEXUS article
ABS warning light abnormal
  1. ABS warning light circuit
  2. ABS & TRAC ECU
ABS Warning Light Circuit 
DTC Always ON: ABS & TRAC ECU Malfunction 
DTC check is impossible Only when 1 and 2 are all normal but the problem is still occurs, replace the ABS & TRAC ECU.
  1. ABS warning light circuit
  2. TRAC OFF indicator light circuit
  3. Tc terminal circuit
ABS Warning Light Circuit 
TRAC OFF Indicator, TRAC Cut Switch Circuit 
Tc Terminal Circuit 
Speed sensor signal check is impossible
  1. Ts terminal circuit
  2. ABS & TRAC ECU
Ts Terminal Circuit 
DTC Always ON: ABS & TRAC ECU Malfunction 
TRAC does not operate Only when inspection circuits for each problem symptom are all normal but the problem still occurs, replace the ABS & TRAC ECU.
  1. Check the DTC, reconfirming that the normal code is output
  2. IG power source circuit
  3. Check the hydraulic circuit for leakage
  4. Speed sensor circuit
PRE-CHECK 
DTC C1241/41: IG Power Source Circuit 
CHECK FOR FLUID LEAKAGE 
DTC C0200/31-C0215/34: SPEED SENSOR CIRCUIT 
SLIP indicator light abnormal SLIP indicator light circuit SLIP INDICATOR LIGHT CIRCUIT 
TRAC OFF indicator light abnormal Only when inspection circuits for each problem symptom are all normal but the problem still occurs, replace the ABS & TRAC ECU.
  1. TRAC OFF indicator light circuit
  2. TRAC cut switch circuit
TRAC OFF Indicator, TRAC Cut Switch Circuit