FixVault

Problem Symptoms Table

If a normal code is displayed during the DTC check but the problem still occurs, check the circuits for each problem symptom in the order given in the PROBLEM SYMPTOMS  table, and proceed to the relevant troubleshooting table .

NOTE: When replacing ABS & BA & TRAC & VSC ECU, sensor or etc., turn the IG switch OFF.
PROBLEM SYMPTOMS

Symptom Suspected Area Refer To
TRAC does not operate Only when inspection circuits for each problem symptom are all normal but the problem still occurs, replace the ABS & BA & TRAC & VCS ECU.
  1. Check the DTC, reconfirming that the normal code is output
  2. IG power source circuit
  3. Check the hydraulic circuit for leakage
  4. Speed sensor circuit PRE-CHECK 
DTC C1241/41: IG POWER SOURCE CIRCUIT
CHECK FOR FLUID LEAKAGE 
DTC C0200/31 TO C0215/34: SPEED SENSOR CIRCUIT
VSC does not operate Only when inspection circuits for each problem symptom are all normal but the problem still occurs, replace the ABS & BA & TRAC & VCS ECU.
  1. Check the DTC, reconfirming that the normal code is output
  2. IG power source circuit
  3. Check the hydraulic circuit for leakage
  4. Speed sensor circuit
  5. Deceleration sensor circuit
  6. Yaw rate sensor circuit
  7. Steering angle sensor circuit
PRE-CHECK 
DTC C1241/41: IG POWER SOURCE CIRCUIT
CHECK FOR FLUID LEAKAGE 
DTC C0200/31 TO C0215/34: SPEED SENSOR CIRCUIT
DTC C1244/44: DECELERATION SENSOR CIRCUIT
DTC C1233/33, C1234/34: YAW RATE SENSOR CIRCUIT 
DTC C1231/31: STEERING ANGLE SENSOR CIRCUIT 
BA does not operate Stop light switch circuit DTC C1249/49: STOP LIGHT SWITCH CIRCUIT
SLIP indicator light is abnormal SLIP indicator light circuit SLIP INDICATOR LIGHT CIRCUIT 
VSC OFF indicator is abnormal Only when inspection circuits for each problem symptom are all normal but the problem still occurs, replace the ABS & BA & TRAC & VCS ECU.
  1. VSC OFF indicator light circuit
  2. VSC OFF switch circuit
VSC OFF INDICATOR LIGHT, VSC OFF SWITCH CIRCUIT 
VSC OFF INDICATOR LIGHT, VSC OFF SWITCH CIRCUIT 
DTC check is impossible Only when inspection circuits for each problem symptom are all normal but the problem still occurs, replace the ABS & BA & TRAC & VCS ECU.
  1. VSC warning indicator circuit
  2. Tc terminal circuit
DTC ALWAYS ON: MALFUNCTION IN ECU VSC WARNING LIGHT CIRCUIT 
TC TERMINAL CIRCUIT
VSC warning light is abnormal Only when inspection circuits for each problem symptom are all normal but the problem still occurs, replace the ABS & BA & TRAC & VCS ECU.
  1. VSC warning indicator circuit
  2. ABS & BA & TRAC & VCS ECU
DTC ALWAYS ON: MALFUNCTION IN ECU VSC WARNING LIGHT CIRCUIT 
DTC ALWAYS ON: MALFUNCTION IN ECU VSC WARNING LIGHT CIRCUIT