Programming Passive Mode On

WARNING: This page is about a different car, the 2000 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.

Remove ignition key from key cylinder. Ensure all doors, engine hood and luggage compartment door are closed and unlocked. Perform all of the following within 30 seconds:

Lock or unlock any door with key or remote keyless entry system.
Open driver door.
Lock and unlock driver door lock knob 3 times.

After performing this, system should start force lock after 2 seconds. Perform all of the following within 20 seconds:

Unlock driver door lock knob.
Close and open driver door 4 times.
Lock and unlock driver door lock knob.

After performing this, system should start force lock after 2 seconds. Passive mode should now be on.