FixVault
Home › Lexus › 2001 › GS 300 › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Radiator › Installation

Cooling System (Mechanical): Radiator: Installation

  1. INSTALL ELECTRIC COOLING FAN TO RADIATOR. 
    1. Install the electric cooling fan with the 6 bolts.
      1. Torque:  5.0 N.m (50 kgf.cm, 44 in. lbf)
    2. Connect the radiator reservoir hose to the radiator.
  2. INSTALL RADIATOR AND ELECTRIC COOLING FAN ASSEMBLY. 
    1. Install the 2 lower radiator supports to the radiator.
    2. Attach the 2 lower radiator supports on the radiator to the body bracket.
    3. Install the radiator and electric cooling fan assembly with the 2 upper radiator supports and 2 nuts.
      1. Torque:  13.5 N.m (135 kgf.cm, 10 ft.lbf)
        2. Fig 1: Installing Upper Radiator Supports
        G03149760Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect these parts:
      • Upper radiator hose to radiator
      • Lower radiator hose to radiator
      • ECM outlet duct to ECM box
      • Wire for electric cooling fan to clamp on electric cooling fan
      • 2 electric cooling fan connectors
      • ECT switch connector for electric cooling fan
      • 2 oil cooler hoses for A/T to radiator
  3. INSTALL AIR CLEANER AND MAF METER ASSEMBLY. 
  4. INSTALL AIR CLEANER INLET. 
  5. FILL WITH ENGINE COOLANT. 
  6. START ENGINE AND CHECK FOR ENGINE COOLANT AND A/T FLUID LEAKS. 
  7. INSTALL ENGINE UNDER COVER. 
About FixVault