Power Steering Gear: Inspection

INSPECT STEERING RACK
1. Using a dial indicator, check the rack for runout and for teeth wear and damage.
  Maximum runout: 0.03 mm (0.0118 in.)
2. Check the back surface for wear and damage.
Fig 1: Checking Rack For Runout
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT BEARING
1. Check the needle roller bearing of the rack housing for pitmarks or damage.
  If faulty, replace the rack housing,
2. Coat the inside of the bearing with molybdenum disulfide lithium base grease.
Fig 2: Identifying Needle Roller Bearing Of Rack Housing
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT BEARING
1. Check the bearing rotation condition and check for abnormal noise.
  If the bearing is worn or damaged, replace the control valve assembly.
2. Coat the bearing with molybdenum disulfide lithium base grease.
Fig 3: Checking Bearing Rotation Condition
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002