Brake Actuator Assembly: Removal

1. Drain brake fluid.
2. Using special tool (09023-00100), disconnect 6 brake lines from actuator. Use tags or make a note to identify the place to reconnect brake lines. See Fig 1.
3. Disconnect the brake actuator harness connector.
4. Disconnect 3 nuts and remove brake actuator with bracket.
5. Remove 2 nuts and brake actuator from bracket. Remove 2 holders and 3 cushions from brake actuator.

Fig 1: Locating Brake Line Connections

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002