FixVault
Home › Lexus › 2002 › ES 300 › Repair and Diagnosis › External Pages › Different car › Section 124 (Power Window Control System - Diagnosis) › Auto Up Operation Does Not Fully Close Power Window (Jam Protection Function Is Activated) › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. RESET POWER WINDOW REGULATOR MOTOR 
    1. Reset the power window regulator motor (see INITIALIZATION  ).
    2. Check if the power window AUTO UP/DOWN function operates normally.

      OK: AUTO UP/DOWN function operates normally. 

    NG: Go to step 2 

    OK: END 

  2. CHECK FRONT DOOR WINDOW REGULATOR ASSY LH 
    1. Remove the door glass (see WINDSHIELD/WINDOWGLASS/MIRROR ).
    2. Operate the front door window regulator assembly using the switch.
    3. Check if the power window regulator assembly operates smoothly.

      OK: Power window regulator assembly operates smoothly. 

    NG: REPLACE FRONT DOOR WINDOW REGULATOR ASSY LH 

    OK: REPLACE DOOR GLASS RUN 

About FixVault