FixVault
Home › Lexus › 2003 › ES 300 › Repair and Diagnosis › External Pages › Different car › Section 237 (Lighting System - Diagnostics) › Generator Signal Circuit › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSY 
    1. Measure the voltage according to the value(s) in SPECIFIED CONDITION  .

      Standard: 

      SPECIFIED CONDITION

      Tester connection Condition Specified condition
      B9-5 - Body ground Engine running 10 to 14 V
      Fig 1: Measuring B9-5 To Body Ground
      G03049363Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG: Go to step   2 
    2. OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (SEE  PROBLEM SYMPTOMS TABLE  ) 
  2. INSPECT GENERATOR ASSY 
    1. Inspect generator assy GENERATOR .
    1. NG: CHECK AND REPLACE GENERATOR ASSY 
    2. OK: REPAIR OR REPLACE HARNESS OR CONNECTOR (GENERATOR ASSY - MULTIPLEX NETWORK BODY ECU) 
About FixVault