Torque Specifications
WARNING: This page is about a different car, the 2004 Toyota Camry and 2003 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Generator Mounting Bolt | |||
| 4-Cylinder | |||
| 8-mm | 15 (21) | ||
| 10-mm | 38 (52) | ||
| V6 | |||
| Pivot bolt | 43 (58) | ||
| Adjustment Lock Bolt | 13 (18) | ||
| Pulley Nut | 81 (111) | ||
| INCH Lbs. (N.m) | |||
| Battery Wire Terminal Nut | 36 (4.1) | ||
| Bearing Retainer Bolt | |||
| 2003 | 27 (3.0) | ||
| 2004 | 20 (2.3) | ||
| Brush Holder Bolt | |||
| 2003 | 18 (2.0) | ||
| 2004 | 16 (1.8) | ||
| CKP Sensor Wire Harness Bracket Bolt | 74 (8.4) | ||
| Drive End Frame Nut | |||
| With Cord Clip | 47 (5.4) | ||
| Without Cord Clip | 39 (4.5) | ||
| Generator Holder With Rectifier Screw | 26 (2.9) | ||
| Generator Rear End Cover | |||
| Screw | 35 (3.9) | ||
| Nut | |||
| 2003 | 40 (4.5) | ||
| 2004 | 41 (4.6) | ||
| Regulator Assembly Screw | 18 (2.0) | ||