Front Passenger's Door (Window Up):

INSPECT JAM PROTECTION LIMIT SWITCH OPERATION 

1. Connect the positive (+) lead from the ohmmeter to terminal 4 and the negative (-) lead to terminal 5.
2. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1.
3. Check that the continuity exists when the window goes up.
   Fig 1: Inspecting Jam Protection Limit Switch Operation (Front Passenger'S Door - Window Up) (1 Of 2)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Check that the no continuity exists when the window is in the fully closed position.
Fig 2: Inspecting Jam Protection Limit Switch Circuit (Front Passenger'S Door - Window Up) (2 Of 2)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If operation is not as specified, replace the motor.