Key Inter Lock Solenoid: Inspection

INSPECT KEY INTER LOCK SOLENOID
1. Disconnect the solenoid connector.
2. Connect KLS+ (4) terminal to the batteries' positive (+) terminal, and KLS-(3) terminal to the battery negative (-) terminal, and apply about 12V between KLS+ -KLS- terminals.
  Check that operation noise can be heard from the solenoid.
  
  If the solenoid does not operate, replace the solenoid.
  
  Fig 1: Inspecting Key Inter Lock Solenoid
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002