Ambient Temperature Sensor: Inspection

1. Disconnect the connector.
2. Using a clip remover, pull out the sensor from bumper reinforcement.

Fig 1: Removing Ambient Temperature Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Measure resistance between terminals at each temperature as shown in the chart.

Fig 2: Sensor Resistance Condition Chart

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Inspecting Ambient Temperature Sensor Resistance

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If resistance is not as specified, replace the sensor.

1. Push the sensor in bumper reinforcement.
2. Connect the connector.

Fig 4: Installing Ambient Temperature Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002