FixVault
Home › Lexus › 2003 › LS 430 › Repair and Diagnosis › Body & Frame › Seats › Rear Left Seat Control System - Diagnosis › Circuit Inspection › Slide Position Sensor Circuit › Inspection Procedure

Inspection Procedure

  1. Check slide position sensor (See  INSPECTION  ). 
    1. NG : Replace power seat motor. 
    2. OK : Go to next step. 
  2. Check harness and connectors between rear LH seat ECU and position sensors, sensors and body ground (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. OK : Repair or replace harness or connectors. 
    2. NG : Check and replace rear LH seat ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
About FixVault