FixVault
Home › Lexus › 2003 › LS 430 › Repair and Diagnosis › External Pages › Different car › Section 949 (Lighting System) › License Plate Lamp Body › Replacement

License Plate Lamp Body: Replacement

WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ASSIST STRAP HOLE COVER (See  OVERHAUL  ) 
  2. REMOVE ASSIST STRAP ASSY (See  OVERHAUL  ) 
  3. REMOVE BACK DOOR TRIM COVER (See  OVERHAUL  ) 
  4. REMOVE BACK DOOR TRIM BOARD (See  OVERHAUL  ) 
  5. REMOVE BACK DOOR GARNISH SUB-ASSY OUTSIDE (See  REPLACEMENT  ) 
  6. REMOVE LICENSE PLATE LAMP ASSY 
    1. Loosen the 4 screws and remove the license plate lamp assy.
    Fig 1: Removing License Plate Lamp Assy
    G02574077Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE LICENSE PLATE LAMP LENS 
    1. Remove the 4 screws and 2 license plate lamp lenses.
    Fig 2: Removing License Plate Lamp Lens
    G02574078Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE LICENSE PLATE LAMP LENS GASKET 
  9. REMOVE LICENSE PLATE LAMP BULB 
    1. Remove the 2 license plate lamp bulbs as shown in Fig 3 .
    Fig 3: Removing License Plate Lamp Bulb
    G02574079Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE LICENSE PLATE LAMP BODY 
About FixVault