LH Step Sub-ASSY: Replacement
WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
On the RH side, use the same procedures as on the LH side.
- REMOVE LH STEP SUB-ASSY
- Remove the 6 bolts holding the side step assy to the side step brackets.
- w/ Step lamp:
Disconnect the step lamp wiring connector.
- Remove the side step assy.
- REMOVE SIDE STEP BRACKET
- Remove the 6 bolts and 3 brackets.
- INSTALL SIDE STEP BRACKET
- Install the 3 brackets with the 6 bolts.
Torque: 19.5 N.m (199 kgf.cm, 14 ft.lbf)
- Install the 3 brackets with the 6 bolts.
- INSTALL LH STEP SUB-ASSY
- Install the step sub-assy with the 6 bolts.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
- Install the step sub-assy with the 6 bolts.