FixVault

Front Seat: Removal

  1. REMOVE SEAT TRACK OUTER COVERS 

    Using a screwdriver, remove the 4 seat track outer covers.

    HINT:

    Tape up the screwdriver tip before use.

  2. REMOVE FRONT SEAT 
    1. Remove the 4 bolts.

      Torque: 42 N.m (430 kgf.cm, 31 ft.lbf) 

    2. Disconnect the connectors, then remove the front seat.
    NOTE:
    • When handling the airbag connector, take care not to damage the airbag wire harness. 
    • Be careful not to damage the body.