FixVault
Home › Lexus › 2003 › RX 300 AWD › Repair and Diagnosis › General Information › OEM General Information › Troubleshooting › Problem Symptoms Table › Turn Signal And Hazard Warning System

Turn Signal And Hazard Warning System

TURN SIGNAL AND HAZARD WARNING SYSTEM TROUBLE SYMPTOMS REFERENCE

Symptom Suspect Area See section
"Hazard" and "Turn" do not light up.
  1. Hazard Warning Switch
  2. Turn Signal Switch
  3. Turn Signal Flasher
  4. Wire Harness
  1. INSPECTION
  2. INSPECTION
  3. INSPECTION
  4. -
The flashing frequency is abnormal.
  1. Bulb
  2. Turn Signal Switch
  3. Wire Harness
  1. -
  2. INSPECTION
  3. -
Hazard warning light does not light up. (Turn is normal)
  1. HAZARD Fuse (Engine Room J/B)
  2. Wire Harness
  1. -
  2. -
Hazard warning light does not light up in one direction.
  1. Hazard Warning Switch
  2. Wire Harness
  1. INSPECTION
  2. -
(1) Turn signal does not light up.
  1. Ignition Switch
  2. GAUGE Fuse (Instrument Panel J/B)
  3. Turn Signal Switch
  4. Wire Harness
  1. ADJUSTMENT
  2. -
  3. INSPECTION
  4. -
(2) Turn signal does not light up.
  1. GAUGE Fuse (Instrument Panel J/B)
  2. Turn Signal Switch
  3. Wire Harness
  1. -
  2. INSPECTION
  3. -
Turn signal does not light up in one direction.
  1. Turn Signal Switch
  2. Wire Harness
  1. INSPECTION
  2. -
Only one bulb does not light up.
  1. Bulb
  2. Wire Harness
  1. -
  2. -
(1) : Combination Meter, Wiper and Washer do not operate.
(2) : Combination Meter, Wiper and Washer are normal.
About FixVault