FixVault
Home › Lexus › 2003 › RX 300 AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission (On-Vehicle Service) › ATF Temperature Sensor › On-Vehicle Repair

On-Vehicle Repair

  1. REMOVE VALVE BODY (See  VALVE BODY ASSEMBLY  ) 
  2. DISCONNECT SOLENOID CONNECTOR 
  3. REMOVE ATF TEMPERATURE SENSOR 

    Remove the bolt and solenoid wire.

    Fig 1: Removing ATF Temperature Sensor
    G01331240Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL ATF TEMPERATURE SENSOR 

    Install the solenoid wire with the bolt.

    1. Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf) 
  5. CONNECT SOLENOID CONNECTOR 
  6. INSTALL VALVE BODY (See  VALVE BODY ASSEMBLY   ) 
About FixVault