FixVault
Home › Lexus › 2003 › SC 430 › Repair and Diagnosis (Single Page) › Brakes › Traction Control › Anti-Lock Brake System › Removal & Installation › Wheel Speed Sensor (Front) › Installation

Wheel Speed Sensor (Front): Installation

  1. To install, reverse removal procedure. Tighten speed sensor bolt to specification. See TORQUE SPECIFICATIONS .
  2. Install the sensor harness with the 2 clamp bolts and resin clip to the body and tighten to specification. See TORQUE SPECIFICATIONS .
  3. Connect the speed sensor connector.
  4. Install the front fender liner and front wheel and tighten lug nuts to specification. See TORQUE SPECIFICATIONS .
  5. Install the ornament with the 10 bolts and tighten to specification. See TORQUE SPECIFICATIONS .
  6. Check speed sensor signal. See SYSTEM TESTING .
About FixVault