Height Control Sensor Sub-ASSY Rear LH: Replacement

HINT:

COMPONENTS: See LIGHTING 

1. REMOVE HEIGHT CONTROL SENSOR SUB-ASSY REAR LH 
   1. Disconnect the connector.
   2. Place matchmarks on the link and bracket.
   3. Remove the nut and disconnect the height control sensor link.
      Fig 1: Placing Matchmarks On Link And Bracket

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   4. Remove the 2 bolts and height control sensor sub-assy rear LH.
   Fig 2: Removing Height Control Sensor Sub-Assy Rear LH

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL HEIGHT CONTROL SENSOR SUB-ASSY REAR LH 
   1. Install the height control sensor sub-assy rear LH with the 2 bolts.

      Torque: 7.8 N.m (80 kgf.cm, 69 in..lbf) 

   2. Align the matchmarks on the height control sensor link and bracket.
   3. Install the nut.

      Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf) 

   4. Connect the connector.
3. HEADLIGHT AIM ONLY (See  ADJUSTMENT  )