DTC P0011, DTC P0012, DTC P0021 Or DTC P0022: Notes

Code Definitions

P0011: Camshaft Position "A" - Timing Over Advanced Or System Performance (Bank 1)
P0012: Camshaft Position "A" - Timing Over Retarded (Bank 1)
P0021: Camshaft Position "A" - Timing Over Advanced Or System Performance (Bank 2)
P0022: Camshaft Position "A" - Timing Over Retarded (Bank 2)

NOTE: For information on engine immobilizer system, see COMPUTERIZED ENGINE CONTROLS in THEORY & OPERATION article.

CAUTION: If ECM replacement is instructed in following testing, always ensure ECM harness connector and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - LEXUS article.