FixVault
Home › Lexus › 2003 › SC 430 › Repair and Diagnosis › External Pages › Different car › Section 331 (Automatic Transmission (On-Vehicle Service)) › Speed Sensor › Replacement

Speed Sensor: Replacement

WARNING: This page is about a different car, the 2004 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SPEED SENSOR (NC0 SENSOR) 
    1. Disconnect the connector.
    2. Remove the bolt and speed sensor.
      Fig 1: Removing Speed Sensor (NC0 Sensor) Bolt
      G00925251Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE SPEED SENSOR (SP2 SENSOR) 
    1. Disconnect the connector.
    2. Remove the bolt and speed sensor.
      Fig 2: Removing Speed Sensor (SP2 Sensor) Bolt
      G00925252Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL SPEED SENSOR (SP2 SENSOR) 
    1. Coat O-ring with ATF.
    2. Install the speed sensor with the bolt.

      Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf) 

    3. Connect the connector.
      Fig 3: Installing Speed Sensor (SP2 Sensor)
      G00925253Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL SPEED SENSOR (NC0 SENSOR) 
    1. Coat O-ring with ATF.
    2. Install the speed sensor with the bolt.

      Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf) 

    3. Connect the connector.
      Fig 4: Installing Speed Sensor (NC0 Sensor)
      G00925254Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault