Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK WIRE HARNESS AND CONNECTOR (ECM - SKID CONTROL ECU)
- Check for an open or short circuit in harness and connector between the ECM and the skid control ECU.
- NG : REPAIR OR REPLACE WIRE HARNESS OR CONNECTOR
- OK : Go to next step.
- REPLACE BRAKE ACTUATOR ASSEMBLY (SKID CONTROL ECU), see REPLACEMENT
or REPLACEMENT
.
HINT:
- If the problem still occurs after the replacement, replace the ECM.
- When a malfunction is found in the skid control ECU, replace the brake actuator assembly.
- Go To Next Step.
- REPLACE ECM, see ECM .