Customize Parameters

WARNING: This page is about a different car, the 2005 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The following items can be customized.

NOTE:

After confirming whether the items requested by the customer are applicable or not for customization, perform the customize operation.
Be sure to record the current settings before customizing.
When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization.
Standard (Power slide door ECU LH/RH):

CUSTOMIZED ITEM REFERENCE

DISPLAY (ITEM)

DEFAULT

CONTENTS

SETTING

PSD SW OPER

0.8s

Function that turns satellite switch ON when switch is pressed for specified time

0.8s/0.0s⁽¹⁾

PSD BUZZ VOL

OFF

Function that adjusts volume of warning buzzer that notifies power slide door is operating

OFF/SMALL/LARGE

WIRELS PSD OPER

0.8sPR

Function that operates power slide door when transmitter switch is pressed in specified way (1-press, 2-presses, 0.8 sec.-press or OFF⁽²⁾)

1 TIME/2TIMES/0.8sPR/OFF⁽²⁾

⁽¹⁾	"0.0s" appearing on the display of the hand-held tester means that a 1-press of the satellite switch operates the power slide door.

⁽²⁾	Wireless (transmitter switch) operation of the power slide door is disabled.