Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Cooler Union | 21 (29) | |||
| Drain Plug | 15 (20) | |||
| Drive Plate Bolt | ||||
| GS 300 & IS 300 | 61 (83) | |||
| Except GS 300 & IS 300 | (1) 36 (49) | |||
| Drive Shaft Bolt | 58 (79) | |||
| Extension Housing Bolt | 25 (34) | |||
| Oil Pump-To-Case Bolt | 16 (22) | |||
| O/D Support-To-Case Bolt | 18 (25) | |||
| Shift Lever Nut | 12 (16) | |||
| Torque Converter-To-Drive Plate Bolt | 35 (48) | |||
| Transmission Housing Bolt | ||||
| 14-mm | 25 (34) | |||
| 17-mm | 42 (57) | |||
| Transmission Output Flange Bolt | 93 (126) | |||
| INCH Lbs. (N.m) | ||||
| Detent Spring Bolt | 87 (9.8) | |||
| Line Pressure Test Plug | 48 (5.4) | |||
| Oil Pan Bolt | 65 (7.4) | |||
| Oil Pump-To-Stator Shaft Bolt | 89 (10) | |||
| Oil Strainer Bolt | 87 (9.8) | |||
| Overdrive Direct Clutch Speed Sensor | 48 (5.4) | |||
| Parking Lock Pawl Bracket Bolt | 65 (7.4) | |||
| Park/Neutral Position Switch | ||||
| Adjusting Bolt | 115 (13) | |||
| Retaining Nut | 61 (6.9) | |||
| Solenoid-To-Valve Body Bolt | 87 (9.8) | |||
| Solenoid Wiring Harness Bolt | 48 (5.4) | |||
| Speed Sensor Bolt | 48 (5.4) | |||
| Upper Valve Body-To-Lower Valve Body Bolt | 57 (6.4) | |||
| Valve Body-To-Case Bolt | 89 (10) | |||
|
||||