Ultrasonic Sensor No.2: Replacement

HINT:

• SEE: COMPONENTS (FRONT BUMPER) and COMPONENTS (REAR BUMPER) .
• SEE: LOCATION .
• Installation is in the reverse order of removal.

1. REMOVE FRONT BUMPER COVER (SEE  REPLACEMENT  ) 
2. REMOVE REAR BUMPER COVER (SEE  REPLACEMENT  ) 
3. REMOVE ULTRASONIC SENSOR RETAINER NO.2 
   1. Disconnect the connector.
   2. Remove the ultrasonic sensor retainer No.2 as shown in the illustration.
      Fig 1: Removing Ultrasonic Sensor Retainer No.2

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. REMOVE ULTRASONIC SENSOR NO.2 
   1. Remove the ultrasonic sensor No.2.
      Fig 2: Removing Ultrasonic Sensor No.2

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002