FixVault
Home › Lexus › 2004 › RX 330 AWD › Repair and Diagnosis › External Pages › Different car › Section 468 (Suspension Control System) › Suspension Control Ecu › Replacement

Suspension Control Ecu: Replacement

WARNING: This page is about a different car, the 2005 Lexus RX 330. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE RH (See  REPLACEMENT  ) 
  2. REMOVE COWL SIDE TRIM SUB-ASSY RH (See  REPLACEMENT  ) 
  3. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO. 2 (See step 27 in  REPLACEMENT  ) 
  4. REMOVE GLOVE COMPARTMENT DOOR ASSY (See step 28 in  REPLACEMENT  ) 
  5. REMOVE ECM (See  REPLACEMENT  ) 
  6. REMOVE AIR CONDITIONER AMPLIFIER ASSY (See  REPLACEMENT  ) 
  7. REMOVE SUSPENSION CONTROL ECU 
    1. Disconnect the suspension control ECU connector.
    2. Remove the 2 bolts and the suspension control ECU from the bracket.
      Fig 1: Removing Suspension Control ECU
      G03012850Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL SUSPENSION CONTROL ECU 
    1. Install the suspension control ECU with the 2 bolts onto the bracket.

      Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf) 

    2. Connect the suspension control ECU connector.
      Fig 2: Installing Suspension Control ECU
      G03012851Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL AIR CONDITIONER AMPLIFIER ASSY (See  REPLACEMENT  ) 
  10. INSTALL ECM (See  REPLACEMENT  ) 
  11. INSTALL GLOVE COMPARTMENT DOOR ASSY 
  12. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSY NO. 2 
  13. INSTALL COWL SIDE TRIM SUB-ASSY RH 
  14. INSTALL FRONT DOOR SCUFF PLATE RH 
About FixVault