FixVault
Home › Lexus › 2004 › RX 330 AWD › Repair and Diagnosis › External Pages › Different car › Section 534 (Lighting) › Front Room Light Assembly › Inspection

Front Room Light Assembly: Inspection

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FRONT ROOM LIGHT ASSEMBLY 
    1. Remove the front room light assembly.
    2. Connect the battery positive (+) lead to terminal 3 and negative (-) lead to terminal 2.
    3. Turn the front room light switch in DOOR position.
    4. Check that the light comes on.
    5. Connect the battery positive (+) lead to terminal 1 and negative (-) lead to terminal 3.
    6. Turn the front room light switch in ON position.
    7. Check that the light comes on.

      OK: Comes on 

      If the light does not come on, replace the front room light assembly.

      Fig 1: Identifying Front Room Light Assembly Connector Terminals
      G05243147Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault