FixVault

AFS Ecu: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL AFS ECU 
    1. Install the AFS ECU with the nut.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

    2. Connect the connector.
  2. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER  (See INSTALLATION )
  3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH  (See INSTALLATION )
  4. INSTALL FRONT DOOR SCUFF PLATE LH 
    Fig 1: Locating AFS ECU Nut
    G05274017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  6. PERFORM INITIALIZATION