FixVault
Home › Lexus › 2004 › RX 330 AWD › Repair and Diagnosis › External Pages › Different car › Section 564 (Lighting) › Back-Up Light Assembly › Removal

Back-Up Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER 
  2. REMOVE BACK-UP LIGHT ASSEMBLY 
    1. Disconnect each connector.
    2. Remove the 3 nuts and disengage the clip, and remove the back-up light assembly.
      Fig 1: Identifying Back-Up Light Assembly Nuts And Clip
      G05273973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault