Headlight Leveling Ecu: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HEADLIGHT LEVELING ECU ASSEMBLY
1. Install the headlight leveling ECU assembly with the nut.
  Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
2. Connect the connector.
INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (See INSTALLATION )

Fig 1: Locating Headlight Leveling ECU Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH
CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
(See INITIALIZATION )