FixVault
Home › Lexus › 2004 › RX 330 AWD › Repair and Diagnosis › External Pages › Different car › Section 565 (Windshield/Window Glass) › Power Window Regulator Motor › Inspection

Power Window Regulator Motor: Inspection

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT RH) 
    1. Remove the power window regulator motor.
      Fig 1: Checking Power Window Regulator Motor Operation (Front RH)
      G05006580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

      Standard 

      VOLTAGE SPECIFICATION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (D)
      Battery negative (-) → Terminal 2 (U)      		 Motor gear rotates clockwise
      Battery positive (+) → Terminal 2 (U)
      Battery negative (-) → Terminal 1 (D)      		 Motor gear rotates counterclockwise
  2. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT LH) 
    1. Remove the power window regulator motor.
      Fig 2: Checking Operation Of Power Window Motor (FRONT LH)
      G05006578Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

      Standard 

      VOLTAGE SPECIFICATION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (D)
      Battery negative (-) → Terminal 2 (U)      		 Motor gear rotates counterclockwise
      Battery positive (+) → Terminal 2 (U)
      Battery negative (-) → Terminal 1 (D)      		 Motor gear rotates clockwise
  3. INSPECT POWER WINDOW REGULATOR MOTOR (REAR RH) 
    1. Remove the power window regulator motor.
      Fig 3: Identifying Power Window Regulator Motor Operation (Rear RH)
      G05006580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

      Standard 

      VOLTAGE SPECIFICATION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (D)
      Battery negative (-) → Terminal 2 (U)      		 Motor gear rotates clockwise
      Battery positive (+) → Terminal 2 (U)
      Battery negative (-) → Terminal 1 (D)      		 Motor gear rotates counterclockwise
  4. INSPECT POWER WINDOW REGULATOR MOTOR (REAR LH) 
    1. Remove the power window regulator motor.
      Fig 4: Checking Power Window Regulator Motor Operation (Rear LH)
      G05006578Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

      Standard 

      VOLTAGE SPECIFICATION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (D)
      Battery negative (-) → Terminal 2 (U)      		 Motor gear rotates counterclockwise
      Battery positive (+) → Terminal 2 (U)
      Battery negative (-) → Terminal 1 (D)      		 Motor gear rotates clockwise
About FixVault