Ignition Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL IGNITION SWITCH
1. Install the ignition switch with the 2 screws.
  
  Fig 1: Locating Ignition Switch Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the clamp.
3. Install the ignition switch connector and unlock warning switch connector.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH